Product ID:PRO-PLUG 321 BALL PLUGGING COMPOUND, 160321-B
MSDS Date:08/10/1993
FSC:8040
NIIN:00F034831
Kit Part:Y
MSDS Number: BTKHM

Emergency Phone: 708-234-8100

Info Phone: 708-234-8100

Cage: 23693

Telephone: 312-234-8100

Cage: 23693

EPICHLOROHYDRIN-BISPHENOL A EPOXY RESIN (FURTHER

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:MFR LISTED NO INFORMATION ABOUT THE
CARCINOGENICITY OF THIS MATERIAL. HMIS DOES NOT EXPECT IT TO BE
CARCINOGENIC.
Effects of Overexposure:INGESTED:POSSIBLE G/I IRRITATION.
INHALED:POSSIBLE RESPIRATORY IRRITATION. EYE:MAY CAUSE IRRITATION &
TRANSIENT CORNEAL INJURY. SKIN:PROLONGED/REPEATED SKIN CONTACT MAY
CAUSE IRRITATION. MAY CAUSE SEN SITIZATION. ABSORPTION OF TOXIC
AMOUNT UNLIKELY.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN ON MSDS BY
MFR.

First Aid:IF ANY IRRITATION PERSISTS OR IS SEVERE,SEE A DOCTOR.
EYE:FLUSH W/WATER 15 MIN,HOLD LIDS OPEN. SKIN:REMOVE CONTAMINATED
CLOTHING AND LAUNDER BEFORE REUSE. WASH WITH SOAP & WATER UNTIL
REMOVED. INGESTE D:REMOVE TO FRESH AIR. RESTORE/AID BREATHING AS
NEEDED. INGESTED:IMMEDIATELY GIVE 2 LARGE GLASSES OF MILK OR WATER
AND INDUCE VOMITING. (NOTHING BY MOUTH IF UNCONSCIOUS.) GET
IMMEDIATE MEDICAL CARE.

Flash Point Method:PMCC
Flash Point:>199F,>93C
Extinguishing Media:USE FIRE EXTINGUISHER DESIGNED FOR COMBUSTIBLE
LIQUID FIRES (CARBON DIOXIDE, ALL PURPOSE DRY CHEMICAL OR ALCOHOL
FOAM).
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SCBA. WATER MAY BE
INEFFECTIVE/MAY BE USED TO COOL EXPOSED CONTAINERS, PREVENTING
PRESSURE BUILDUP, AUTOIGNITION AND/OR EXPLOSIONS.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
MAY BE HEALTH HAZARD. SYMPTOMS MAY BE DELAYED-GET MEDICAL
ATTENTION. COOL CONTAINERS TO PREVENT EXPLOSION/AUTOIGNITION.

Spill Release Procedures:USE NIOSH?MSH APPROVED TC19C AIR SUPPLIED
BREATHING APPARATUS. CONTAIN SPILL &COVER W/INERT ABSORBENT.
PREVENT MATERIAL. PLACE IN OPEN CONTAINER. WEAR PERSONAL PROTECTIVE
EQUIPMENT APPROPRIATE TO SIZE OF SPILL & EXPOSURE ENCOUNTERED.
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY MFR.

Handling and Storage Precautions:AVOID PROLONGED HEATING OVER 160F OR
STORAGE BELOW 50 F. PROTECT FROM MOISTURE WHICH MAY CAUSE AN
EXOTHERMIC GENERATION OF CARBON DIOXIDE (PRESSURE).
Other Precautions:DO NOT TAKE INTERNALLY, CLOSE CONTAINER AFTER EACH
USE. EMPTY CONTAINERS MUST NOT BE WASHED AND USED FOR ANY PURPOSE.

Respiratory Protection:USE POSITIVE PRESSURE AIR-SUPPLIED RESPIRATOR,
NIOSH SCHEDULE TC19C. REFER TO OSHA 29CFR1910.134 RESPIRATORY
PROTECTION.
Ventilation:MECHANICAL IS PREFERRED.
Protective Gloves:IMPERMMABLE GLOVES
Eye Protection:SAFETY SPECTACLES & CHEM SPLASH GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT. SAFETY
SHOWER & EYEWASH FACILITY SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH THOROUGHLY WITH SOAP & WATER BEFORE MEALS,
BREAKS, AND AT THE END OF THE WORK DAY.
Supplemental Safety and Health
AVOID BREATHING VAPORS OF HOT MATERIAL. KEEP CONTAINERS CLOSED WHEN
NOT IN USE. USE SUGGESTED PROTECTIVE EQUIPMENT. THIS IS THE EPOXY
RESIN PART OF THE "KIT". NO MSDS WAS RECEIVED FROM AIR FORCE FOR
THE HARDENER.

HCC:N1
NRC/State Lic Num:NONE
Spec Gravity:1.13
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:CLEAR YELLOW MEDIUM VISCOSITYLIQUID
W/CHARACTERISTIC PHENOLIC ODOR.**9.4 LB/GAL
Percent Volatiles by Volume:N/K 0
Corrosion Rate:UNKNOWNN

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, BASES, AMINES, OR ACIDS.
Stability Condition to Avoid:EXCESSIVE HEATING OVER LONG PERIODS OF
TIME DEGRADES THE RESIN.
Hazardous Decomposition Products:IMPERFECT COMBUSTION OR PYROLYSIS MAY
FORM VARRIOUS PHENOLIC COMPOUNDS, CARBON MONOXIDE, AND CARBON
DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT-SPARK & FLAME.
AVOID HIGH TEMP AND/OR HUMIDITY. FREEZING MAY CAUSE A TEMPORARY
HAZE.

Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE, AND LOCAL
REGULATIONS. AS PRODUCED, THIS PRODUCT IS NOT A WASTE. IF DISCARDED
AS IS, THIS MATERIAL IS NOT CLASSIFIED A HAZARDOUS WASTE UNDER
RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.